CAME FAST 70

-
+
-
+
-
+
-
+
p.
10
10 - Manual code:
FA00095-EN
FA00095-EN v.
4 - 08/2017 - © Came S.p.A. The contents of this manual may be changed at any time without prior notice.
Establishing the limit-switch points
With the gearmotor released and the gate-leaf closed, adjust the closing limit-switch
grub screw by turning it clockwise or counterclockwise ().
Tighten the nut to fasten the grub-screw ().
In the same way, set the opening limit-switch on the other stop's grub screw
().