CAME ZLJ24 - Advanced Function Settings; Obstacle Detection Configuration; Safety Test Configuration; Pre-flashing and Ram Blow Settings

X 2
X 2
X 4
X 2
X 3
X 2
X 2
X 5
Pag.
13
13 -
Manual code
:
319U98EN
319U98EN
ver.
2
2 06/2013 © CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
<Safety d.Test>
Disabled
Safety d.Test
< Disabled >
Safety d.Test
< CX >
Safety d.Test
< CY >
Safety d.Test
< CZ >
Safety d.Test
< CX+CY >
Safety d.Test
< CX+CZ >
Safety d.Test
< CX+CY+CZ >
Obstacle Det.
< Disabled >
<Obstacle Det.>
Disabled
Obstacle Det.
< Turn on >
Obstacle detected: when motor is stopped (gate closed or after a total stop command) it prevents any movement if safety devices,
such as photocells, detect any obstacles.
Safety test: allows the card to check the efficiency of any safety devices (i.e. photocells) after every opening or closing command.
Preflashing
< Disabled >
< Preflashing >
Disabled
Pre-flashing: after an opening or closing command, the flashing light, connected to 10-E, starts flashing before the gate begins its run
(to set the time, see “Pre-flashing timing” from the Adjust Timings menu
< LAN
GU
A
G
E
>
En
g
lis
h
FUNCTIONS
T
IMING ADJ
.
U
S
ER
S
INF
O
I
m
p
. Ru
n
< LAN
GU
A
G
E
>
En
g
lis
h
FUNCTIONS
T
IMING ADJ
.
U
S
ER
S
INF
O
I
m
p
.
R
u
n
< LAN
GU
A
G
E
>
E
ng
li
s
h
FUNCTIONS
T
IMIN
G
AD
J.
U
S
ER
S
INF
O
I
mp.
R
u
n
Ram blow: be
f
ore any opening run, the gate leaves will press onto the mechanical endstop
f
or a
f
ew seconds, to help release the
electrolock (to set the time, see “Ram timing” in the Adjust Timings menu).
Ram hit funct.
< Disabled >
<Ram hit funct.>
Disabled
< LAN
G
UA
G
E
>
E
ng
li
s
h
FUNCTIONS
TIMING ADJ
.
US
ER
S
INFO
Ram hit funct.
< Close >
Ram hit funct.
< Open >
Ram hit funct.
< Open-Close >