CAME ZLJ24 - Programming the Control Panel; Understanding Display Commands; Navigating the Menu System

Lingua
Italiano
Þß
{
{
{
{
Pag.
9
9 -
Manual code
:
319U98EN
319U98EN
ver.
2
2 06/2013 © CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
To enter the menu, keep the
ENTER key pressed for at least one
second.
To select a menu item,
mode using the greater
than-lesser than keys...
...then press ENTER
also use the greater
than-lesser than keys
for the “sub-menus”...
If the <> are on the TIME
function, you may modify the
value.
To increase or reduce values,
use the greater than-lesser
than keys...
...then press ENTER to confirm...
...to exit the menu, wait 30
seconds, or press ESC, until start
screen is displayed.
N.B.: when the menu is active, the system cannot be used.
7 Programming
...then press ENTER
7.2 Browsing the menu
7.1 Description of display commands
The ENTER key is for:
- entering the menu;
- confirming and memorising set values.
The ESC key is for:
- exiting the menu;
- cancelling modifications.
The < > keys are for:
- shifting from one menu item to another;
- increase or decrease values.
the <...> symbols on the display are for:
-pointing out the currently, selected item
LANGUAGE
English
Þß
LANGUAGE
English
Þß
FUNCTIONS
English
Þß
TIMING ADJ.
Þß
A.C.T.
90s
Þß
Cycle Time
90s
Þß
Cycle Time
90s
Þß
Cycle Time
100s
Þß