Campbell CR1000X - 10.6 Pulse Measurement Specifications

Protection:
l Wiring panel:IP40
l Measurement module when connected to the wiring panel: IP65
EMIand ESD protection:
l Immunity: Meets or exceeds following standards:
o
ESD: per IEC 61000-4-2; ±8 kV air, ±4 kV contact discharge
o
RF: per IEC 61000-4-3; 3 V/m, 80-1000 MHz
o
EFT: per IEC 61000-4-4; 1 kV power, 500 V I/O
o
Surge: per IEC 61000-4-5; 1 kV power and I/O
o
Conducted: per IEC 61000-4-6; 3 V 150 kHz-80 MHz
l Emissions and immunity performance criteria available on request.
10. Specifications 175