the memory so the tables “fill up” (newest data starts to overwrite the oldest data) at about the
same time. It is recommended you reserve the use of auto-allocation for data tables that store
data based only on time (tables that store data based on the DataInterval() instruction).
Event or conditional tables are usually set to a fixed number of records. View data table fill times
for your program on the Station Status | Table Fill Times tab (see Checking station status (p. 113)
for more information). An example of the Table Fill Times tab follows. For information on data
table storage, see the CRBasic help and Data memory (p. 38).
4. Data 37
To Next Page
Loading...
