Need help?Do you have a question about the Cannon CAV 4.2 and is the answer not in the manual?
General| Brand | Cannon |
|---|---|
| Model | CAV 4.2 |
| Category | Measuring Instruments |
| Language | English |
Lists documents relevant to the CAV 4.2 operation and standards.
Outlines essential safety measures for operating the CAV 4.2.
Instructions for unpacking and verifying the CAV 4.2 and accessories.
Steps to connect hoses and fill baths for initial CAV 4.2 setup.
Details on assembling the CAV 4.2 and connecting tubing for solvent and waste.
Guidance on filling the temperature baths with silicone bath fluid.
Instructions for connecting the CAV 4.2 to power and network.
Procedure to set the desired temperature for the CAV 4.2 baths via the GUI.
Steps to verify and calibrate the bath temperature using the CAV 4.2 GUI.
How to set the vacuum and pressure for the CAV 4.2 instrument.
Instructions for verifying and adjusting default wash settings on the CAV 4.2.
Procedure to run a wash cycle through the CAV 4.2 prior to testing.
Steps to train the CAV 4.2 sensors at a new operating temperature.
Guide to performing sample tests and verifying calibration on the CAV 4.2.
How to review and export test results from the CAV 4.2 to a USB drive.
Connecting CAV systems and PC to the network switch using CAT cables.
Steps for installing the VISCPRO II software on the PC.
Configuration steps for the PC's network adapter for VISCPRO II.
Setting up Windows Firewall rules for VISCPRO II communication.
Adjusting power settings for the USB to Ethernet adapter for VISCPRO II.
Understanding and adjusting CAV registry settings for network configuration.
Overview of the CAV 4.2 Graphical User Interface and its modes.
Description of the VISCPRO II software interface and its modules.
Creating and managing user accounts for VISCPRO II and CAV 4.2 GUI.
Procedures for changing user passwords in VISCPRO II and CAV 4.2 GUI.
How to set up and edit user accounts and privilege levels.
Steps to log out of user accounts in VISCPRO II and CAV 4.2 GUI.
Establishing a connection between VISCPRO II and the CAV 4.2 instrument.
Setting bath temperature using the VISCPRO II software interface.
Calibrating the temperature of the CAV 4.2 baths via VISCPRO II.
Adjusting vacuum and pressure settings for the CAV 4.2 using VISCPRO II.
Training the sensors of the CAV 4.2 using the VISCPRO II software.
Performing a wash cycle for the viscometer tube using VISCPRO II.
Procedure for running kinematic viscosity tests using VISCPRO II software.
Guide to updating the CAV 4.2 user interface, software, and firmware.
Instructions for replacing the CAV 4.2 User Interface updater program.
Steps to update the CAV 4.2 User Interface software.
Procedure for updating the CAV 4.2 controller firmware.
Steps to install or update the VISCPRO II software.
Detailed instructions for changing the viscometer tube in the CAV 4.2.
Steps for replacing the power supply assembly in the CAV 4.2.
How to adjust the optical sensors in the solvent dosing chamber.
Details the limited warranty terms for CANNON Instrument Company products.
Outlines the warranty for reagents and chemicals sold by CANNON.
Procedures and requirements for returning a product for repair or service.
To Next Page
