Cannon CAV 4.2 - Create a Standard CAV Data Table Analysis; Table 28 - CAV Data Table Fields

CAV® 4.2 Operator's Manual, Rev. 2.0
57
CANNON® Advanced Setup
Create a standard CAV Data Table analysis
An analysis is used to view detailed data stored in the VISCPRO II database.
1. Select Analysis > View Analysis. The Choose Analysis window opens.
2. Open Basic Package.
3. Click on CAV DATA Table.
4. Select Define and Open New Configuration. Click OK. The CAV Analysis Configuration
window opens.
5. On the Date Filter tab, set the appropriate range for the data to be displayed.
6. On the Sample Filter tab, set the filters on the type of data to be displayed.
7. On the Report tab, select the data items to display:
Table 28 — CAV data table fields
Setting
Description
Sample ID
Descriptive name given to the sample
INV
Invalid test indication
TOL
(Tolerance) Acceptable difference in multiple test results for the
test
Date
Date the test was run
Time
Time the test was run
Tube S/N
Tube serial number
Tray
Bath number
Smple Index
Sample position
Bulb
Bulb in which the sample ran
Technician
The technician logged into VISCPRO when the test was run
Instrument Type
Instrument type (CAV, CCS, etc.)
Instrument ID
Instrument identification, from Instrument Settings
Comment
Displays comments associated with the sample