Cannon CAV 4.2 - Change password; Setup and edit user accounts; Logout

CAV® 4.2 Operator's Manual, Rev. 2.0
42
Operating the CAV 4.2 CANNON®
Change password
In order to change a password, you must be logged in as the user whose password you are
changing. However, in VISCPRO II a user with a higher privilege level may assign a new
password by editing a user account.
1. For VISCPRO II: click Main > Change Password … The Change Password window opens.
For CAV 4.2 GUI: click Users > Change Manager Password. Because new accounts cannot
be created using the CAV 4.2 GUI, this is the only option.
2. Type your new password into the appropriate fields.
3. Click OK or the green checkmark.
Setup and edit user accounts
(VISCPRO II only) Service level users can setup and edit manager and technician accounts.
Manager level users can setup and edit only technicians. The default account may not be
edited.
1. Click Main > Update User Information … The Change User List window opens.
2. Select the appropriate user. To create a new user, type a unique user name.
3. To assign a password to a user, type the password into the appropriate fields.
4. To assign a privilege level, select the appropriate level in the drop-down box.
5. To save changes click Add or Update User.
6. To close the Change User List window, click Done.
7. To delete the user record from the database, click Remove User.
Logout
It is not necessary to logout in order to change user accounts. Logout does not close
VISCPRO II. It changes the login to the default (Unknown: Technician) account.
1. For VISCPRO II: click Main > Logout.
For CAV 4.2 GUI: click Users > Logout.