Cannon CAV 4.2 - Page 41

CAV® 4.2 Operator's Manual, Rev. 2.0
31
CANNON® Connecting with VISCPRO II
• Select All programs and click Next.
• Change Protocol Type to ICMPv4.
• Click Customize.
• Select Specific ICMP types.
• Check Echo Request and click OK. Click Next.
• Select both Any IP address boxes. Click Next.
• Select Allow the connection. Click Next.
• Check all boxes: Domain, Private, and Public. Click Next.
• In the Name field, enter Ping In. Click Finish.
6. Configure on outbound rule to send ping requests:
• In the upper left corner, click Outbound Rules.
• In the upper right corner, under Actions, click New Rule.
• Select Custom. Click Next.
• Select All programs and click Next.
• Change Protocol Type to ICMPv4.
• Click Customize.
• Select Specific ICMP types.
• Check Echo Request and click OK. Click Next.
• Select both Any IP address boxes. Click Next.
• Select Allow the connection. Click Next.
• Check all boxes: Domain, Private, and Public. Click Next.
• In the Name field, enter Ping Out. Click Finish.
7. Close the Windows Firewall with Advanced Security window.