Canon Canovision8 E50E - Chapter 1 Operations; Main Parts in Mechanical; Locations and

Chapter 1 Operations
1.Main Parts in Mechanical Section
1-1 Locations and Nomenclatures
@®c coaster @prum motor®coaster (Right) @Capstan motor
(Left)
@bhoading motor
@ovrive gear
(Left) <
@Pinch roller
@ tension @cG-7 arm
regulating ~~
=
pall.
Drive gear
(Right)
—|
@v. brake -~@ ts Seake:
=: @T reel
@s reel
ie @Mode @uB brake @S brake @Penduium gear
switch
Fig.I-1
i-2 Relationships between Each Mode and Mode Switch
% (cm) A B c
-
-7-2.7 | opened | opened | shorted
°
-7-5,7 | opened | opened | opened
5.7-6.7 | opened | shorted | shorted
6.7-8.1 | opened | shorted | opened
8.1-9.1 | shorted} shorted | opened
9.1-12.0 | shorted! opened | opened
12.0-13.3| shorted] opened | shorted
Fig.1I-2 Table I-1
Note: “Opened" and "Shorted". in the
table is versus the COMMON.