Canon Canovision8 E50E - Maintenance Tools and Supplies

CHAPTER II,
.Ps
1-1
DISASSEMBLING / ADJUSTMENTS.
List of maintenance tools and supplies
Maintenance tools
DESCRIPTION TOOL NO. REMARKS
Alignment tepe E (MONOSCO) DY9-1062-000
Alignment tape G (V DO Master) DY9-1064-000
Recording current checker DY9-1056-000
Y/C mix amplifier DY9-1079-000 7
Extension connector kit DY9-1092-500 (AIE,F)
Extehsion connector kit DY9-%1102-000 New
Color bar chart DY9-2002-000
Logarithmic gray scale chart DY9-2005-000
“Adjuster (2.6 mm) OY9-2021-000
Phillips screwdriver (bit part only) | 0Y9-2030-000
Adjuster (1.8 mm) DY9-2041-000
Color viewer (5600°K) DY9=2039-500-220 | EUROPE, H.K. etc.
DY9-2039-500-240 | U.K.
Color viewer lamp (5600°K) DY9-2040-000
ND~2.0 filter (100 x 100 mm) DY9-2044-000
Supplies
Floil G902
Screw lock 1401C CY9-8011-000
Alonalpha CY9-8007-000
Grease GE-C9 CY9-8043-000
Grease GE-X8 CY9-8044-000
Grease GE-C4 CY9-8045-000
Teflon Fluorocarbon Resin MP-102 DY9-3015-000
DY9-3017-000
Note:
separately issued.
For recorder mechanism, refer to the mechanism manual MC-48 (DY8-3391-501 201)