Machine Settings
12-16
TX/RX SETTINGS
3. AUTO REDIAL Sets whether to redial automatically when the other line is busy
or a transmission error occurs. (See Chapter 4, “Sending and
Receiving,” in the Reference Guide.)
ON Customizes the redial operation.
1. REDIAL TIMES Sets the number of retries. (1TIMES–10TIMES)
2. REDIAL
INTERVAL
Sets period of time before redialing. (2MIN.–99MIN.)
3. TX ERROR
REDIAL
Sets whether the machine redials automatically when
transmission error occurs.
ON
OFF
–
–
OFF After the first attempt at dialing fails, redialing is not attempted.
4. TIME OUT Sets whether to scan a document automatically after specifying
the destination.
* This function is not available when you dial with the numeric keys.
OFF
ON
–
–
5. DIALING LINE CHCK Sets whether to check the telephone line condition.
OFF
ON
–
–
4. RX SETTINGS Sets the reception features.
1. ECM RX Sets whether the ECM (Error Correction Mode) reception is
activated.
ON
OFF
–
–
To Next Page
Loading...
