Canon ImageCLASS MF4690 - Page 272

12-15
Machine Settings
TX/RX SETTINGS
2. FAX SETTINGS. Set the fax features.
1. RX MODE Selects the receive mode. (See “Set the Machine for Receiving
Faxes,” in the Starter Guide.)
FaxOnly
FaxTel
AnsMode
DRPD
Manual
–
–
–
–
–
2. USER SETTINGS Specifies the basic operation settings in the fax mode.
1. UNIT TELEPHONE # Registers your fax number (max. 20 characters, including
spaces). (See “Set the Machine for Sending Faxes,” in the Starter
Guide.)
2. TEL LINE TYPE Selects the telephone line type. (See “Set the Machine for
Sending Faxes,” in the Starter Guide.)
TOUCH TONE
ROTARY PULSE
–
–
3. OFFHOOK ALARM Sets whether the alarm sounds when the handset of the external
telephone is off the hook.
ON
OFF
–
–
3. TX SETTINGS Sets the transmission features.
1. ECM TX Sets whether the ECM (Error Correction Mode) transmission is
activated.
ON
OFF
–
–
2. PAUSE TIME Sets the pause time when you insert pause into the dialing
sequence. (1SEC–15SEC)