Machine Settings
12-14
TX/RX SETTINGS
1. TWO-SIDED PRINT Sets whether the machine prints received documents on both
sides of the paper. (See Chapter 4, “Sending and Receiving,” in
the Reference Guide.)
OFF
ON
–
–
2. RECEIVE REDUCTION Sets whether the received images print out at a reduced size.
(See Chapter 4, “Sending and Receiving,” in the Reference
Guide.)
ON Image reduction is turned on.
1. RX
REDUCTION
Selects the reducing type.
AUTO
FIXED REDUCTION (90%, 95%, 97%, 75%)
–
–
2. REDUCE
DIRECTION
Selects the reducing direction.
VERTICAL ONLY
HORIZ & VERTICAL
–
–
OFF Image reduction is turned off.
3. RX PAGE FOOTER Sets whether to insert the machine’s fax number and the sender
information on received faxes.
OFF
ON
–
–
4. CONT. PRINTING Selects how the machine responds when the <TONER LOW/
PREPARE NEW TONER> message appears.
RX TO MEMORY The machine stores all documents in memory.
KEEP PRINTING The machine does not store documents in memory if the toner
runs out. Reset to <RX TO MEMORY> after replacing the toner
cartridge.
To Next Page
Loading...
