Machine Settings
12-38
SYSTEM SETTINGS
ON Specifies a MAC address filter to access. MAC address must be
entered for each setting.
1. PERMIT RX ADD1
2. PERMIT RX ADD2
3. PERMIT RX ADD3
4. PERMIT RX ADD4
5. PERMIT RX ADD5
–
–
–
–
–
2. USE SMB CLIENT Sets the SMB settings to use the machine on a NetBIOS network.
OFF SMB client is not used.
ON SMB client is used.
1. SERVER Enters the NetBIOS name of the machine.
2. WORKGROUP Enters the name of the workgroup the machine belongs to.
3. COMMENT Enters a comment about the printer.
4. LM
ANNOUNCE
Sets if the machine notifies the LAN Manager of its existence.
OFF
ON
–
–
3. SNMP SETTINGS Sets detailed information about SNMP.
1. USE SNMP Sets whether to activate SNMP.
ON
OFF
–
–
2. COMMUNITY NAME 1 Sets SNMP community name 1 (default: public).
3. COMMUNITY NAME 2 Sets SNMP community name 2.
4. SNMP WRITABLE 1 Enables computers on the network to access the machine and
modify its settings.
ON
OFF
–
–
To Next Page
Loading...
