Canon ImageCLASS MF4690 - Page 296

12-39
Machine Settings
SYSTEM SETTINGS
5. SNMP WRITABLE 2 Enables computers on the network to access the machine and
modify its settings.
OFF
ON
–
–
4. DEDICATED PORT Sets or browses detailed information on the machine with a
Canon printer driver or utility.
ON
OFF
–
–
5. ETHERNET DRIVER Specifies the type of network connection.
1. AUTO DETECT Selects the detection method of Ethernet driver.
AUTO Sets the machine to determine the communication mode (Half
duplex/Full duplex) and Ethernet type (10Base-T/100Base-TX)
automatically.
MANUAL Sets the communication mode and Ethernet type manually.
1. COMMUNICATN
MODE
Selects the communication mode.
HALF DUPLEX
FULL DUPLEX
–
–
2. ETHERNET
TYPE
Selects the Ethernet type.
10 BASE-T
100 BASE-TX
–
–
6. VIEW IP ADDRESS Checks the current network settings.
1. IP ADDRESS Checks the IP address.
2. SUBNET MASK Checks the subnet mask.
3. GATEWAY ADDRESS Checks the gateway address.