Canon imagePROGRAF iPF710 User Manual

Safety Pre cautions
•
Never insert your hand into the printer while it is printing. Moving parts inside the printer can
cause injuries.
•
Never place an ything on the printer such as small metal objects (paper clips, staples), liquids,
any type of liquid container that contains flamm able liquids (alcohol, benzene, etc.). If such
objects fall into the printe r, this could cause a fi
re or electrical shock.
•
After removing the Cutter Unit , never touch the cutting edge . This c ould cause personal injury.
•
To prevent a fire hazard or dangerous electric sh
ock, if a foreign object falls into or a liquid spills
into the printer, press the Power button immediately to switch the printer off, unplug th e printer
power cable from the outlet, and then call for service. If you continue to use the printer, this
couldcauseafire or electrical shock.
•
Connect the interface cable correctly. To avoid damage, befo re connection make sure that the
shape of the cable connector matches the connection point on the printer.
•
Do not block the vents on the top and right side of the unit while the printer is on.
•
Avoid placing pa pers or other light objects near the right-side vent.
•
Trademarks
Canon, the Can on logo, and imagePRO GRAF are trademarks or registered tradem arks of
CANON INC.
Microsoft an d Windows are tradem arks of Microsoft Co rp oration, r egistered in the U.S.
and other countries.
Macintosh is trademark of Apple Inc., registered in the U.S. and other co untries.
All other trademarks or registered tradem arks described in this Reference Gui de are the
property of their respective owners.
•
Cross-reference
Cross-references are given in the following format.
Information in the Reference Guide (→P.xx)
Information in the User Manual (→"xx," User Manual)
•
Legal Notice
•
It is illegal to reproduce currency, bills, negotiable securities and other documents
prohibited by law. Reprod uction of such items may be subject to criminal prosecution.
•
It is illegal to reproduce legal certificates, licenses, travel tickets, and certain public and
private documents prohibited from reproductionbylaw. Reproductionofsuchitems
may be subject to crim inal prosecution.
•
Please note that intellectual property p rotected by copyright m ay not be reproduced
without the express perm ission of the copyrigh t holder except for personal or household
use under limited circumstances.
5

Canon imagePROGRAF iPF710 Specifications

Printer Specifications

print resolution (max.)	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm
number of nozzles	Matte Black: 5, 120 Nozzles, Other Colors: 2, 560 Nozzles per Color
droplet size	4 Picoliter
nozzle pitch (head resolution)	1200 dpi x Two Rows
print head swath	1.07 inch

Ink Specifications

ink type	Dye: Cyan (C), Magenta (M), Yellow (Y), Black (K); Pigment: Matte Black (MBK) – Two Channels
ink tank capacity	130ml per Color
number of colors	5

Media Specifications

media width (roll feed)	10" – 36" (254mm – 914.4mm)
media width (cut sheet)	8" – 36" (203.2mm – 914.4mm)
printable margins (roll feed)	All Sides: 0.12" (3mm) or 0" for Borderless
minimum printable media length (roll feed)	8.0" (203mm)
maximum print length (roll feed)	59' (18m)
maximum print length (cut sheet)	5.2' (1.6m)
borderless printing widths (roll media only)	10", 14", 16", 24", 36", B2 (20.28"/515mm), A1 (23.38"/594mm), B1 (28.66"/728mm), AO (33.11"/841mm)
media thickness (roll feed)	0.07 – 0.8mm (2.8 – 31.4mil)
media thickness (cut sheet)	0.07 – 0.8mm (2.8 – 31.4mil)
media core sizes	2" or 3" Core (2/3" Core Adapter Included)
maximum roll outer diameter	5.9" (150mm)

Power and Acoustic

power supply	AC 100–240V (50-60Hz)
power consumption (maximum)	140W or Less
power consumption (standby)	5W or Less (10W or less when IEEE1394 is mounted)
power consumption (power off)	1W or Less (Executive Order Compliant)
acoustic noise (operation)	52dB (A) or Less
acoustic noise (standby)	35dB (A) or Less
acoustic power	6.6 Bels or Less

Operating Environment

operational temperature	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)

Weight and Dimensions

printer dimensions (h x w x d)	59.3" x 34.3" x 43.1" / 1507mm x 871mm x 1094mm
weight (with stand)	Approx. 141 lb. / 64kg