Safety Precautions
█Power Supply
•
Always grip the plug to remove the power cable from the powe
r outlet. Pulling on the power
cable co uld damage the cable and lead to a fire or electrical shock.
•
Never use an e xtension cord. This could cause a fire or electrical shock.
•
Never use any po wer source other than AC 100–120 / 220–240 V. This could cause a fire or
electrical shock. The printer o perating conditions are described below. Use the printer under
the following conditions.
Power supply voltage: AC 100–120 / 220–240 V
Power supply freque ncy: 50/60Hz
█Cleaning the Printer
•
Always disconnect the pow er cable from the outlet before cleaning the printer. If the printer is
switched on a ccidentally, mo ving parts inside the printer may c ause personal injuries.
█ Printhead , Ink Tanks and Maintenance C artridge
•
Always store consumables in a safe location out of the re ach of small children. If a child licks or
ingests ink accidentally, seek medical assistance immediately.
•
Avoid dropping or shaking Printheads , Ink Tanks , and Maintenance Cartridges . Spilled ink
can stain clothing and the work area.
•
Never touch the electrical contacts of the Printhead after printing. The contacts become
extremely hot and can ca use minor burns.
█Other
•
Never disassemble the printer or attempt repairs. There are high voltage parts inside the
printer that can cause a fire or electrical shock.
•
Never use flammable s prays around the printer. The gas of flammable sprays can cause a fire
or electrical shock, if it contacts high voltage points inside the printer.
4
To Next Page
