Canon imagePROGRAF iPF710 User Manual

Troubleshooting If You Cannot Print as Expected
68
Phenomenon
Cause
Corrective Action
Colors in printed images
are uneven
Line Drawing/Text is selected
when printing images in many
solid colors.
Specify Image in the printer driver.
You are printing on paper that
curls easily.
Printed colors may appear uneven
on the leading edge of paper that is
susceptible to curling. Increase the
level of vacuum holding the paper
against the Platen or specify a margin
of 20 mm (0.79 in) or more for the
leading edge. (→"Adjusting the Vacuum
Strength," User Manual)
Printed colors may be uneven
if you set the Print Quality too
low.
Choose a higher level of Print Quality
in the Advanced Settings of the printer
driver.
When using Borderless Printing,
the edge of the paper is cut
during printing. Thus, ink density
may not be even at the edges.
Specify No in Auto Cut in the printer
driver before printing. In this case, the
paper can be printed without borders
on the left and right sides only. Cut
the printed document ejected from the
printer, then use scissors to cut away
the edges on the top and bottom.
(→"Giving Priority to Particular Graphic
Elements and Colors for Printing," User
Manual)
Color may be uneven between
dark and light image areas.
Select Unidirectional Printing in the
Advanced Settings of the printer
driver.
Choose a higher level of Print Quality
in the Advanced Settings of the printer
driver.
(→"Giving Priority to Particular Graphic
Elements and Colors for Printing," User
Manual)
The Printhead is out of
alignment.
Adjust the Printhead alignment.
(→P.45)
Drying documents stacked on
each other may cause uneven
colors.
To avoid uneven colors, we recommend
drying each sheet separately.
If you use Glossy Paper, art
paper or Coated Paper, color
shading may appear at the rear
edges of the paper.
In Advanced Settings of the printer
driver, choose Highest or High in Print
Quality.

Canon imagePROGRAF iPF710 Specifications

Printer Specifications

print resolution (max.)	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm
number of nozzles	Matte Black: 5, 120 Nozzles, Other Colors: 2, 560 Nozzles per Color
droplet size	4 Picoliter
nozzle pitch (head resolution)	1200 dpi x Two Rows
print head swath	1.07 inch

Ink Specifications

ink type	Dye: Cyan (C), Magenta (M), Yellow (Y), Black (K); Pigment: Matte Black (MBK) – Two Channels
ink tank capacity	130ml per Color
number of colors	5

Media Specifications

media width (roll feed)	10" – 36" (254mm – 914.4mm)
media width (cut sheet)	8" – 36" (203.2mm – 914.4mm)
printable margins (roll feed)	All Sides: 0.12" (3mm) or 0" for Borderless
minimum printable media length (roll feed)	8.0" (203mm)
maximum print length (roll feed)	59' (18m)
maximum print length (cut sheet)	5.2' (1.6m)
borderless printing widths (roll media only)	10", 14", 16", 24", 36", B2 (20.28"/515mm), A1 (23.38"/594mm), B1 (28.66"/728mm), AO (33.11"/841mm)
media thickness (roll feed)	0.07 – 0.8mm (2.8 – 31.4mil)
media thickness (cut sheet)	0.07 – 0.8mm (2.8 – 31.4mil)
media core sizes	2" or 3" Core (2/3" Core Adapter Included)
maximum roll outer diameter	5.9" (150mm)

Power and Acoustic

power supply	AC 100–240V (50-60Hz)
power consumption (maximum)	140W or Less
power consumption (standby)	5W or Less (10W or less when IEEE1394 is mounted)
power consumption (power off)	1W or Less (Executive Order Compliant)
acoustic noise (operation)	52dB (A) or Less
acoustic noise (standby)	35dB (A) or Less
acoustic power	6.6 Bels or Less

Operating Environment

operational temperature	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)

Weight and Dimensions

printer dimensions (h x w x d)	59.3" x 34.3" x 43.1" / 1507mm x 871mm x 1094mm
weight (with stand)	Approx. 141 lb. / 64kg