Canon imagePROGRAF iPF710 User Manual

92 pages

To Next Page

1 Safety Precautions

Safety Precautions .............................................2

3 Basic Operations

Turning the Printer On and Off ...........................8

Loading a Roll ................................................... 11

Loading Sheets Manually .................................18

Printing from Windows ......................................22

Printing from Mac OS X ....................................25

Printing from Mac OS 9 ....................................28

4 Maintenance

Replacing Ink Tanks .........................................31

Cleaning the Printer ..........................................38

Checking for Nozzle Clogging ..........................43

Cleaning the Printhead .....................................44

Adjusting the Printhead Alignment Automatically

..45

Adjusting the Feed Amount Automatically ........47

5 Troubleshooting

Responding to Messages .................................48

Troubleshooting If You Cannot Print .................60

Troubleshooting If You Cannot Print as Expected

..64

Clearing Jammed Roll Paper ............................73

Clearing a Jammed Sheet ................................78

6 Consumables

Consumables ....................................................81

7 Appendix

Index .................................................................83

ENG

2 imagePROGRAF Support

Information

imagePROGRAF Support Information ...............6

Read this manual before attempting to operate the printer.

Keep this manual in a handy location for future referencing.

Other manuals for Canon imagePROGRAF iPF710

Brochure & Specs8 pages

Specification Sheet4 pages

Operations2 pages

Questions and Answers:

D
Danielle MurphyJul 26, 2025
How to fix Canon imagePROGRAF iPF710 Printer that ejects blank paper?
- K
  Keith SmithJul 26, 2025
  Your Canon printer might eject blank paper because the leading edge of the roll paper was cut to straighten it. This is normal when Trim Edge First in the printer menu is On or when Trim Edge First is Automatic and the leading edge is slanted. The printer cuts the leading edge of the roll to straighten it and ejects the scraps. The printer will be ready to print after this. When Off is selected under Trim Edge First, the edge is not cut and scraps are not removed. Another possible reason is that the Printhead nozzles are clogged. In this case, print a test pattern to check the nozzles. Clean the Printhead if the nozzles are clogged.
M
Michael DavisAug 16, 2025
Why does Canon Printer display that the system is filling with ink?
- K
  Kiara MendozaAug 16, 2025
  If your Canon printer's display screen indicates that the system is filling with ink, it's likely because a cleaning operation was terminated when the printer was previously turned off. Wait until the system has been filled with ink; this process may take about ten minutes.

Canon imagePROGRAF iPF710 Specifications

Printer Specifications

print resolution (max.)	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm
number of nozzles	Matte Black: 5, 120 Nozzles, Other Colors: 2, 560 Nozzles per Color
droplet size	4 Picoliter
nozzle pitch (head resolution)	1200 dpi x Two Rows
print head swath	1.07 inch

Ink Specifications

ink type	Dye: Cyan (C), Magenta (M), Yellow (Y), Black (K); Pigment: Matte Black (MBK) – Two Channels
ink tank capacity	130ml per Color
number of colors	5

Media Specifications

media width (roll feed)	10" – 36" (254mm – 914.4mm)
media width (cut sheet)	8" – 36" (203.2mm – 914.4mm)
printable margins (roll feed)	All Sides: 0.12" (3mm) or 0" for Borderless
minimum printable media length (roll feed)	8.0" (203mm)
maximum print length (roll feed)	59' (18m)
maximum print length (cut sheet)	5.2' (1.6m)
borderless printing widths (roll media only)	10", 14", 16", 24", 36", B2 (20.28"/515mm), A1 (23.38"/594mm), B1 (28.66"/728mm), AO (33.11"/841mm)
media thickness (roll feed)	0.07 – 0.8mm (2.8 – 31.4mil)
media thickness (cut sheet)	0.07 – 0.8mm (2.8 – 31.4mil)
media core sizes	2" or 3" Core (2/3" Core Adapter Included)
maximum roll outer diameter	5.9" (150mm)

Power and Acoustic

power supply	AC 100–240V (50-60Hz)
power consumption (maximum)	140W or Less
power consumption (standby)	5W or Less (10W or less when IEEE1394 is mounted)
power consumption (power off)	1W or Less (Executive Order Compliant)
acoustic noise (operation)	52dB (A) or Less
acoustic noise (standby)	35dB (A) or Less
acoustic power	6.6 Bels or Less