Canon imagePROGRAF iPF710 User Manual

Troubleshooting If You Cannot Print as Expected
70
The Printhead nozzles are
clogged.
Print a test pattern to check the nozzles
and see if they are clogged.
In the printer driver, Application
Color Matching Priority is not
selected.
Printhead characteristics
gradually change through
repeated use, and colors may
change.
Color may change slightly even
on the same model of printer if
you use a different version of
the rmware or printer driver, or
when you print under different
settings or in a different printing
environment.
Follow these steps to prepare the
printing environment.
Adjust the Printhead alignment.
Printed colors are
inaccurate
Color adjustment has not been
activated in the Advanced
Settings of the printer driver.
In the Advanced Settings of the printer
driver, access Color Settings in Color
Mode to adjust colors.
Colors have not been adjusted
on the computer or monitor.
Refer to the computer and monitor
documentation to adjust the colors.
Adjust the settings of the color
management software, referring to the
software documentation as needed.
(→P.43)
Click Special Settings on the Layout
sheet of the printer driver and select
Application Color Matching Priority
in the dialog box.
The Platen suction is too strong. Set VacuumStrngth to Weakest.
(→"Adjusting the Vacuum Strength,"
User Manual)
The Printhead is set too high. Lower the Printhead. (→"Adjusting the
Printhead Height," User Manual)
Documents are printed
crooked
Skew Skew Check Lv. has been
set to Loose or Off.
Width Detection has been set to
Off.
Choose On in Width Detection.
Choose Standard in Skew Check Lv..
Phenomenon
Cause
Corrective Action
1.
2.
Use the same version of rmware,
printer driver, and other software.
Specify the same value for all settings
items.
(→P.45)
(→"Adjusting the Printhead Alignment
Manually," User Manual)
Image Edges are Blurred
or White Banding Occurs

Canon imagePROGRAF iPF710 Specifications

Printer Specifications

print resolution (max.)	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm
number of nozzles	Matte Black: 5, 120 Nozzles, Other Colors: 2, 560 Nozzles per Color
droplet size	4 Picoliter
nozzle pitch (head resolution)	1200 dpi x Two Rows
print head swath	1.07 inch

Ink Specifications

ink type	Dye: Cyan (C), Magenta (M), Yellow (Y), Black (K); Pigment: Matte Black (MBK) – Two Channels
ink tank capacity	130ml per Color
number of colors	5

Media Specifications

media width (roll feed)	10" – 36" (254mm – 914.4mm)
media width (cut sheet)	8" – 36" (203.2mm – 914.4mm)
printable margins (roll feed)	All Sides: 0.12" (3mm) or 0" for Borderless
minimum printable media length (roll feed)	8.0" (203mm)
maximum print length (roll feed)	59' (18m)
maximum print length (cut sheet)	5.2' (1.6m)
borderless printing widths (roll media only)	10", 14", 16", 24", 36", B2 (20.28"/515mm), A1 (23.38"/594mm), B1 (28.66"/728mm), AO (33.11"/841mm)
media thickness (roll feed)	0.07 – 0.8mm (2.8 – 31.4mil)
media thickness (cut sheet)	0.07 – 0.8mm (2.8 – 31.4mil)
media core sizes	2" or 3" Core (2/3" Core Adapter Included)
maximum roll outer diameter	5.9" (150mm)

Power and Acoustic

power supply	AC 100–240V (50-60Hz)
power consumption (maximum)	140W or Less
power consumption (standby)	5W or Less (10W or less when IEEE1394 is mounted)
power consumption (power off)	1W or Less (Executive Order Compliant)
acoustic noise (operation)	52dB (A) or Less
acoustic noise (standby)	35dB (A) or Less
acoustic power	6.6 Bels or Less

Operating Environment

operational temperature	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)

Weight and Dimensions

printer dimensions (h x w x d)	59.3" x 34.3" x 43.1" / 1507mm x 871mm x 1094mm
weight (with stand)	Approx. 141 lb. / 64kg