Canon IP100 - View Mode Switching; System Event Log Display

WebCAM user manual -63-
Chapter 6: MultiMonitor
Clicking once will cause the camera to pan right by 1 deg.
Click and hold and the camera will pan increasingly faster to
the left.
Click once to tilt the camera up by 1 deg.
Click and hold and the camera will tilt increasingly faster
upwards.
Click once to tilt the camera down by 1 deg.
Click and hold and the camera will tilt increasingly faster
downwards.
Auto Pan (if camera which support this function)
2.2 View
: Switch between Large or Small icon view
Large icon display
Small icon display
2.3 System
: Display the Event Log (IP address, Port, date, Time, description of
event) of the selected WebCAM.