Canon iR2020 Series Service Manual

Chapter 9
9-12
F-9-50
9.4.3 Power Supply Unit
9.4.3.1 Removing the Rear Cover
0010-9965
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
F-9-51
9.4.3.2 Removing the Right Cover (Lower)
0010-9967
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover.
2) Remove the five screws [1]. Remove the two hooks [2], and then detach
the right cover (lower) [3].
F-9-52
9.4.3.3 Removing the Delivery Tray
0010-9968
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the delivery tray [2].
F-9-53
9.4.3.4 Removing the Main Power Supply PCB
0010-9969
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the connector [1] and screw [2], and then remove the power
supply PCB [3].
F-9-54
F-9-55
9.4.4 Control Panel
9.4.4.1 Removing the Reader Front Cover
0010-9978
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the copyboard cover (or ADF).
2) Remove the two screws [1], and then detach the reader front cover [2].
F-9-56
[2] [2]
[2] [2]
[3]
[1]
[1]
[2]
[1]
[2]
[3]
[1]
[1] [2]
[1]
[2]
[2] [2]
[2]
[1]
[2]

Canon iR2020 Series Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Network Ready	Optional
Print Speed	20 ppm
Resolution	600 x 600 dpi
Duplex Printing	Optional
Connectivity	USB 2.0
Type	Monochrome
Paper Size	A4, A5, B5
Copy Speed	20 cpm
Multiple Copy	Up to 99 copies
Scan Speed	20 ipm
Warm-up Time	Less than 15 seconds
First Print Time	Less than 10 seconds
Paper Input	250 sheets
First Copy Time	Less than 10 seconds