Canon iR2020 Series Service Manual

Chapter 9
9-17
F-9-81
5) Remove the fan filter [1] from the duct.
F-9-82
MEMO:
When a duplex unit is used, first remove the duplex unit and next remove the
fan filter from it.
9.4.10 Motor of Main Drive Assembly
9.4.10.1 Removing the Rear Cover
0011-0048
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
F-9-83
9.4.10.2 Removing the Main Motor
0011-0049
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect the connector [1], remove three screws [2], and then remove
the main motor [3].
F-9-84
9.4.11 Fixing Driver Motor
9.4.11.1 Removing the Rear Cover
0011-0406
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
F-9-85
9.4.11.2 Removing the Left Cover (Rear)
0011-0407
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
F-9-86
9.4.11.3 Removing the RAM Cover
0011-0621
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the RAM cover [2].
[2]
[1]
[1]
[1]
[2]
[1]
[2]
[1]
[3]
[1]
[2]
[1]
[2]
[1]

Canon iR2020 Series Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Network Ready	Optional
Print Speed	20 ppm
Resolution	600 x 600 dpi
Duplex Printing	Optional
Connectivity	USB 2.0
Type	Monochrome
Paper Size	A4, A5, B5
Copy Speed	20 cpm
Multiple Copy	Up to 99 copies
Scan Speed	20 ipm
Warm-up Time	Less than 15 seconds
First Print Time	Less than 10 seconds
Paper Input	250 sheets
First Copy Time	Less than 10 seconds