0258-011
Hardware Specifications
Type Desktop Page Printer
Printing System Semiconductor laser + xerographic system
Toner fixing system On-demand fixing system
Resolution 600 dpi
Printing speed
(Plain paper (60 to
90 g/m²), when
printing A4 size
paper continuously)
Black and white printing: 20 pages/minute
Color printing: 20 pages/minute
The print speed may drop depending on the paper settings for the size, type,
orientation, and number of copies.
Warm up time
(Time from power
on to printer ready)
31 seconds or less
May vary depending on the usage conditions, such as the availability of the optional
accessories and installation environment.
Recovery time
(Time from the
sleep mode to
printer ready)
8 seconds when the printer is in Sleep Mode 1 (the Printer Sleep mode)
9 seconds when the printer is in Sleep Mode 2 (the Deep Sleep mode)
*
*
It is the default setting. For details on [Sleep Mode], see "Sleep Mode."
May vary depending on the output environment.
First print time
(When performing
1-sided printing on
A4 size paper and
outputting face-
down)
Black and white printing: 16 seconds or less
Color printing: 16 seconds or less
May vary depending on the output environment.
Paper size
Drawer 1/Drawer 2 (Optional)
Standard sizes:
A4, B5, A5, Legal, Letter, Executive, Statement, Foolscap, Envelope DL, Envelope
COM-10, Envelope ISO-C5, and Envelope ISO-B5
Custom paper sizes
*1
:
Width 100.0 to 215.9 mm, Length 148.0 to 355.6 mm
If you are using the UFR II printer driver, you can load custom size paper that is 148.0
to 215.9 mm wide and 148.0 to 215.9 mm long also in landscape orientation.
Multi-purpose tray
Standard sizes:
A4, B5, A5, Legal, Letter, Executive, Statement, Foolscap, Index Card, Envelope DL,
Envelope COM-10, Envelope ISO-C5, Envelope ISO-B5, and Envelope Monarch
Custom paper sizes
*1
:
Width 76.2 to 215.9 mm, Length 127.0 to 355.6 mm
If you are using the UFR II printer driver, you can load custom size paper that is 127.0
to 215.9 mm wide and 127.0 to 215.9 mm long also in landscape orientation.
*1
Width must not be greater than length (height).
Printer Specifications
㻠㻡㻌㻛㻌㻥㻥㻤
To Next Page
Loading...
