106
Adjusting the Play Time and Repeat
Settings
Play Time
Sets the duration that each image displays. Choose
between 3*–10 seconds, 15 seconds and 30 seconds.
Displaying time can vary slightly depending on the image.
*Default setting.
Repeat
Sets whether the slide show stops when all the slides have
been displayed or continues until stopped.
1
Select [Set up] and press .
2
Select [Play Time] or [Repeat] and then
the desired option.
z Pressing the MENU button
cancels the setting.
z Selecting All Images
1 After selecting – in step 1 (p. 105), use the
button to select [Mark all] and press the FUNC./SET
button.
2 Use the button to select [Mark all], press the
FUNC./SET button.
3 Use the button to select [OK] and press the
FUNC./SET button.
z To deselect all images, select [Reset].
To Next Page
Loading...
Need help?
General
