114
Setting the Print Style
After setting the print style, select the images for printing. The
following settings can be selected.
*Default setting
Print Type
Standard* Prints one image per page.
Index
Prints the selected images together at a
reduced size in an index format.
Both
Prints the images in both the standard
and index formats.
Date (On/Off*) Adds the date to the print.
File No. (On/Off*) Adds the file number to the print.
Clear DPOF data (On*/Off)
Clears all print settings after the images
print.
1
(Print) Menu [Print Settings].
See Menus and Settings (p. 25).
2
Select [Print Type], [Date], [File No.], or
[Clear DPOF data] and then specify the
settings.
z The Date and File No. settings change according to the
Print Type as follows.
- Index
[Date] and [File No.] cannot be set to [On] at the same
time.
- Standard or Both
[Date] and [File No.] can be set to [On] at the same time,
however, the printable information may vary between
printers.
z Dates print in the style specified in the [Date/Time] menu
(Basic Guide p. 8).
To Next Page
Loading...
