68
You can set the exposure and focus separately. This is effective
when the contrast is too strong between the subject and
background or when a subject is backlit.
To Release the AE Lock: Operate a button other than the control
dial and the ISO Speed dial.
Locking the Exposure Setting
(AE Lock)
Shooting Mode
You must set the flash to . The AE lock cannot be set if
the flash fires.
1 Turn on the LCD monitor.
2
Focus on the part of the subject on which
you wish to lock the exposure setting.
3
Press the shutter button halfway.
4
Press the button.
z Exposure is fixed.
5
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
z After locking the AE, you can change the ISO speed with
exposure fixed.
z You can use the FE lock when using the flash (p. 69).
To Next Page
Loading...
Need help?
General
