42
* Cannot be set in and modes.
Normally, the (Auto) white balance setting selects an optimal
white balance. When the (Auto) setting cannot produce natural
looking colors, change the white balance using a setting
appropriate for the light source.
White Balance Settings
Adjusting the Tone (White Balance)
Shooting Mode
1
FUNC. Menu * (Auto).
See Menus and Settings (p. 24).
* Default setting.
z Use the or button to select a
white balance setting and press the
FUNC./SET button.
Auto Settings are automatically set by the camera.
Day Light For recording outdoors on a bright day.
Cloudy
For recording under overcast, shady or twilight skies.
Tungsten
For recording under tungsten and bulb-type 3-
wavelength fluorescent lighting.
Fluorescent
For recording under warm-white, cool-white or
warm-white (3-wavelength) fluorescent lighting.
Fluorescent H
For recording under daylight fluorescent, or
daylight fluorescent-type 3-wavelength
fluorescent lighting.
Flash
When using the flash (cannot be set in
mode).
Underwater
Appropriate for shooting images with the
Waterproof Case WP-DC11 (sold separately).
This mode yields image data in the optimal white
balance to record images with natural hues by
reducing the bluish tone.
Custom
For recording with the optimal white balance
data retained in the camera from a white-colored
object, such as white paper or cloth.
*
To Next Page
Loading...
Need help?
General
