120
Troubleshooting
Camera
Camera will not operate.
Power is not turned on. z Press the power button (Basic
Guide p. 10).
Memory card slot/battery
cover is open.
z Confirm that the memory card slot
/battery cover is securely closed
(Basic Guide p. 6).
Battery charge is low and
the camera will not operate.
(“Change the battery pack”
message displays).
z Insert a fully charged battery into
the camera (Basic Guide p. 6).
z Use the AC Adapter Kit ACK-
DC20 (sold separately) (p. 138).
Poor contact between
camera and battery
terminals.
z Polish the terminals with a soft
cotton swab before charging or
using the battery (p. 134).
Sounds come from the camera interior.
The camera’s horizontal/
vertical orientation was
changed.
z The camera’s orientation
mechanism is operating. There is
no malfunction.
When the power is turned on
“Card locked!” message appears.
The SD memory card’s or
SDHC memory card’s write
protect tab is set to “Write
protect”.
z When recording to, erasing from
or formatting the memory card,
slide the write protect tab upward
(p. 136).
The Date/Time menu appears.
The built-in rechargeable
lithium battery charge is low.
z Recharge the built-in battery
immediately (Basic Guide p. 8).
To Next Page
Loading...
