119
Customizing the Camera (My Camera Settings)
3 Select an image or record a sound.
z Start-up Image
Use the or button to select the
image you wish to register and press
the FUNC./SET button.
z Start-up, Operation, Self-timer and
Shutter Sounds
Select (Record) and press the
FUNC./SET button. After recording,
select (Register) and press the
FUNC./SET button.
- Recording will automatically stop when the recording time
elapses.
- To play it, select (Play).
- To exit instead of registering, press (Exit).
4 Select [OK] and press .
z To cancel registering, select [Cancel].
z The following cannot be registered as My Camera settings.
-Movies
- Sounds recorded with the sound memo function (p. 101)
and sound recorder (p. 102)
z The prior setting is erased when a new My Camera setting
is added.
See the supplied Software Starter Guide for more information
on creating and adding to the My Camera data.
To Next Page
Loading...
