40
1
FUNC. Menu * (Evaluative)
See Menus and Settings (p. 24).
* Default setting.
z Use the or button to select the
metering mode and press the FUNC./
SET button.
Lock the spot AE point to the center of
the LCD monitor/Move the spot AE point
to the same position as the selected AF
frame
1
(Rec.) Menu [Spot AE Point]
[Center]*/[AF Point]
See Menus and Settings (p. 25).
* Default setting.
z When [Spot AE Point] is set to
[Center], the spot AE point frame
appears at the center of the LCD
monitor.
z When [Spot AE Point] is set to [AF Point], it appears
inside the selected AF frame.
To Next Page
Loading...
