26
Configuring Network Settings
The following instructions are for settings screens that vary depending on the communication
method (FTP, PTP, or HTTP), as shown below. Read the page that introduces the selected
communication method.
FTP
Chapter 2 (p.29)
PTP
Chapter 3 (p.43)
HTTP
Chapter 4 (p.49)
Completing Settings for the Communication Method
Windows Vista Users
Before performing the operations from page 43, perform the operations below. If these operations are
not performed, the WFT Pairing Software described on page 44 may not start.
Open the [
C Drive
] [Program Files] [Canon] [EOS Utility] [WFTPairing] folder (in this
order), and then double-click the [WFT FirewallSettings] icon.
After performing this operation, perform the operation on page 43.
To Next Page
Loading...
