96
You can configure the wireless or wired LAN settings by using the software provided with the
camera, WFT Utility. This is convenient if you want to create a wireless or wired LAN settings
file when the camera and transmitter are not nearby.
WFT Utility also enables you to create captions for attachment to images before transfer via
FTP.
Start WFT Utility from EOS Utility.
In EOS Utility, access [Accessories] to start WFT Utility.
Click the tabs for the transmitter’s [TCP/IP settings], [FTP settings], and [Wireless LAN
settings] and complete the required settings for a wireless or wired LAN connection.
Settings available here are the same as settings on the camera, with the addition of settings
for creating captions.
WFT Utility (Software)
Starting WFT Utility
Using Wireless or Wired LAN Settings
To Next Page
Loading...
