Canton Sound M User Manual

3
47
English
Problem Possible cause Solution
A speaker shows
[WLS] in the display�
1� The slave speaker is operated
without the Soundbar�
1� Turn on the Soundbar�
2� The slave speaker is not paired yet� 2� Pair the slave speaker with the Soundbar according
to the chapter "Wireles Speaker Pairing" / [ WSP] �
The subwoofer does
not reproduce sound�
1� The subwoofer is not paired yet� 1� Pair the slave speaker with the Soundbar according
to chapter " Wireless Speaker Pairing" / [WSP]�
2� The subwoofer is connected to the Soundbar
using a RCA cable, but Sub Out is set to Off(not
activated�
2� Activate the output Sub Out (ON) at the "Sub Out" / [SUB]
menu�

Canton Sound M Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDMI in	3
Bluetooth version	5.0
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Woofer diameter	50 mm
Tweeter diameter	19 mm
Crossover frequency	3000 Hz
Woofer diameter (imperial)	2 \
Tweeter diameter (imperial)	0.75 \
Cables included	AC, HDMI, Optical
Display type	LED
Product color	Black
Power consumption (standby)	0.4 W

Weight and Dimensions

Depth	100 mm
Width	725 mm
Height	65 mm
Soundbar weight	4000 g