Stop before driving downhill, shift the auxiliary
speed change lever to the “LOW” speed position,
and drive downhill at reduced speed.
Reduce Driving Speed going Downhill
Post notice boards before that operation to show
that job site is under operation. If necessary,
apply guard ropes to enclose and restrict access
so that people (especially children) may not enter
the work area and safety may be ensured.
Secure Area (No Admittance) During
Operation
Use care during operation to avoid throwing
stones and small objects that may be
dangerously toward nearby persons, animals,
crops, cars or other objects.
Beware of Flying Objects
Before performing cutting work, always check
holes and other obstacles in the operation area.
Use caution to avoid these obstacles.
Safety Precautions When
Operating
To Next Page
Loading...
