CanyCom CM 230 - Emergency Transferring

-43-
Operation 6
Emergency Transferring
When the machine cannot be moved by normal means due to engine trouble or other factors,
transfer it using this procedure.
Speed change lever
L
H
N
1. Shift the speed change lever to “NEUTRAL”.
* Do not use this method to transfer the machine from an inclined area.
Rotary height adjusting switch
2. Push the “HIGH” side of the rotary height
adjusting switch to raise the rotary cutter to the
highest position.
Parking brake lock lever
Brake pedal
3. Release the parking brake lock lever, and then
transfer the machine.
5314M-0604-040-E
5314M-0602-010-E
5314M-0602-030-E