CanyCom CM 230 - Cleaning Cooling System; Inspecting, Cleaning, and Replacing Ignition Plug

-53-
Maintenance 7
Cleaning Cooling System
1. Remove the air cleaner cover, fan cover guard,
and fan cover.
2. Clean the fan housing and cooling fan using
compressed air.
5317M-0704-010-E
Cooling fan
Fan housing
Fan cover
Fan cover guard
Inspecting, Cleaning, and Replacing Ignition Plug
Ignition plug cap
1. Remove the ignition plug cap.
Inspecting Ignition Plug
* Avoid pulling the cord when removing the ignition plug cap.
5317M-0704-010-E
5310M-0707-020-E