Inspecting Engine Oil
1. Park machine on level ground.
2. Open the engine cover.
3. Pull out the oil gauge. Clean the gauge with
clean cloth. Reinsert to measure oil level.
Inspection
4. Check the oil level visually and confirm that the
oil level is within the range indicated by "A" on
the oil level gage.
5. After adding oil, securely attach the cap of the
oil inlet port.
5310M-0601-050-E
* Check the amount of oil before the engine is
started or at least 10 minutes or more after
the engine has stopped. Immediately after
the engine is stopped, oil still remains in parts
of the engine, so oil checks are not accurate.
NOTE
* Always stop the engine before checking the engine oil.
5310M-0601-040-E
To Next Page
Loading...
