Details of Attachments
Before using the machine the first time after purchasing it, perform the following inspections
and checks.
Preparation for Starting
Adding Grease and Oil
When using a manual grease pump, push its handle five to six times. When resistance
becomes heavy, immediately stop pushing. When using a pneumatic grease pump,
pumping for two to three seconds is enough.
* Periodically perform greasing and oiling. Neglected grease and oil may
result in parts seizing and rusting, which may hinder the smooth rotation and
operation of the machine.
Before using the machine the first time after purchasing it, check that all the attachments
shown below are available.
Part name Quantity Remarks
1
Operator's manual
1
This manual
2
Instruction manual for engine
1
3
Plug wrench
1
4
Closed wrench
1
Preparation
To Next Page
Loading...
