CanyCom CM 230 - Fuel; Grease; Lubricant; Fluid Chart

-47-
Maintenance 7
Fuel / Grease / Lubricant / Fluid Chart
Item Timing Recommendation
Amount
Reference
page
Fuel
As necessary. Gasoline
30.0 liter
See page
17
Engine oil
Add : Check daily and
add as necessary.
Replace :
1st time after 8
operating hours
2nd time and later :
every 50 operating
hours (about every
week)
Engine oil
API class : SE higher #20~#30
SAE class: 10W-30
1.5 liter
See page
19
Transmission oil
1st time after 50
operating hours
2nd time and later :
every 500 operating
hours
Gear oil
API class GL4 or 5
SAE class #80 2.0 liter
See page
60
HST oil
Engine oil
SAE class: 20W-50
3.0 liter
See page
57
Oil for the cutter blade
counter case
-
Gear oil
API class GL4 or 5
SAE class #80
0.39 liter
Oil for the cutter blade
upper case
-
Gear oil
API class GL4 or 5
SAE class #80
0.83 liter
Front differential gear oil
(center)
-
Gear oil
API class GL4 or 5
SAE class #80
0.36 liter
See page
61
Front knuckle gear oil
(both sides)
-
Gear oil
API class GL4 or 5
SAE class #80
Each
0.05 liter
See page
61
Lubrication
Every six months. Gear oil
API class GL4 or 5
SAE class #80
-
See pages
20, 73
Grease
Every six months. Chassis grease
-
See pages
20, 73
Battery fluid
Check every month and
add as necessary.
Distilled water
-
See page
64