CanyCom CM 230 - Page 37

-31-
Operation 6
Parking brake lock lever
Brake pedal
OFF
ON
START
Main switch
7. Depress the foot brake pedal.
8. Insert the key into the main switch.
9. Turn the main switch to the "START" position to
start the engine.
Accelerator lever
H L
10. Shift the accelerator lever to the “LOW” side.
Choke lever
11. Push the choke lever to the left if necessary to
use.
NOTE
* The engine will start only when the operator
is sitting on the seat and the brake pedal
is depressed. Under these conditions, the
safety switch is disengaged.
5314M-0602-060-E
5314M-0602-010-E
5313M-0602-070-E
5314M-0602-080-E