CanyCom CM 230 - Page 42

Operation
-36-
6
ON
Main switch
OFF
Parking brake lock lever
Brake pedal
3. Depress the brake pedal to firmly stop the
machine.
4. Lock the brake pedal, using the parking brake
lock lever.
5. Confirm that the blade clutch lever is
positioned at “OFF”.
Rotary height adjusting switch
6. Push the "HIGH" side of the rotary height
adjusting switch to raise the blades to the
highest position. (Check the position of the
rotary cutter through the blade height monitor.)
Blade clutch lever
7. Turn the main switch to “OFF” to stop the
engine.
8. Pull out the key from the main switch.
5314M-0602-010-E
5317M-0604-030-E
5314M-0602-030-E
5313M-0604-020-E