CanyCom CM 230 - Page 51

-45-
Maintenance 7
Item Action
Timing
Remarks
Per-operation
Monthly
Yearly
Engine
Lubricating
system
The amount of oil should be proper and no
noticeable dirt should be found in oil.
○ ○ ○
Action / Replacement
(see page 52)
There should be no noticeable oil leak in the
head cover, oil pan, and oil tubes.
○ ○ ○
Fuel system
There should be no noticeable fuel leak in the
fuel tank, injection pump, and fuel tubing.
○ ○ ○
There should be neither damage nor
deterioration in the fuel hose.
○ ○ ○
There should be neither noticeable dirt nor
clogging in the fuel filter.
○ ○
Cleaning (see page 56)
Electrical
Ignition plug
There should be neither wear nor carbon
deposits on the electrodes.
○ ○ Cleaning (see page 53)
Battery
The amount of electrolyte should be kept in the
specified range.
○ ○
There should be neither looseness nor noticeable
corrosion on the terminals.
○ ○
Wiring
harness
There should be no looseness in the connections.
○ ○
There should be no damage in the wiring.
○ ○
Power train
V-belts
There should be neither visual damage nor
adhesion of grease to belts.
○ ○
The tension of V-belts should be proper.
○ ○
Transmission
The transmission should operate normally in
turning and forward and backward driving of the
machine, and there should be neither irregular
noise nor overheating.
○ ○ ○
The amount of oil in the casing should be proper
and no noticeable dirt should be found in oil.
○ ○
There should be no oil leak around the casing.
○ ○
Speed adjustment
Speed change
lever
The lever should reliably shift to every speed
changing position and the machine should
properly responce.
○ ○ ○
There should be neither looseness nor rattle in
the lever-mounting portion.
○ ○ ○
HSTpedal
The pedal should reliably operate.
○ ○ ○
There should be neither looseness nor rattle in
the pedal-mounting portion.
○ ○ ○
Drive system
Steering wheel
The steering wheel should reliably be turned.
○ ○ ○
Tire, wheel
The tire pressures should match specified values.
○ ○
The tires and wheels should not have any crack,
damage, nor unbalances.
○ ○ ○
Metal pieces, stones or foreign matter should not
be caught in tire grooves.
○ ○ ○
There should be neither looseness of nor missing
wheel bolts and hub nuts.
○ ○ ○
There should not be any rattles, irregular noises,
or overheating in the wheel bearings.
○ ○