Item Description
Schedule
Note
PSI
Mon
Year
Engine
General
Valve
Clearance
Valve clearance shall be correct.
* this may be skipped if there is no noise due
to incorrect valve clearance, and engine
runs normally.
√
Contact your CANYCOM
representative for
inspection.
Compression
Compression shall be normal
* this may be skipped if running and exhaust
condition is normal at idle and under
acceleration.
√
Contact your CANYCOM
representative for
inspection.
Engine
Mount
Engine base shall be free of cracks or
deformation.
√ √ √
Mounting bolts and nuts shall not be loose or
missing.
√ √ √
Lubrication
System
Oil shall be clean and at correct level.
√ √ √
Inspecting/Changing:
Page 42
No noticable oil leaks shall be found in head
cover, oil pan, or pipes.
√ √ √
Fuel System
There shall not be any leaks in fuel tank,
hoses, or pipes.
√ √ √
Fuel hoses shall be free of damage or
deterioration.
√ √ √
Fuel filter shall not be excessively dirty or
clogged.
√ √
Inspecting: Page 49
There shall not be sediment or water in fuel
tank.
√ √
Inspecting/Removing
water: Page 49
Injection puressure and injection condition
from the nozzle shall be normal.
* this may be skipped if running and exhaust
condition is normal at idle and under
acceleration.
√
Contact your CANYCOM
representative for
inspection.
Cooling
System
Coolant shall be clean and at the correct
level.
√ √ √
Inspecting/Filling:
Page 45
There shall not be any leaks from radiator,
engine, water pump, or hoses.
√ √ √
Radiator fins shall be free of clogging.
√ √ √
Radiator cap valve shall function properly.
√
Fan belt shall be free of wear and damage,
and shall be properly tensioned.
√
Adjusting: Page 47
Cooling fan, duct, and cover shall be free of
cracks, damage, or deformation.
√
Mounting bolts and nuts on cooling fan, duct,
and covers shall not be loose or missing.
√
To Next Page
Loading...