11
MLB242
User’s Guide MLB242-V1
parts have to comply with the analyser specications. In case of analyser problems
contact your representative.
! 5 Safety of the product
European Directives consulted during the design stage. The analyzer has been de-
signed and constructed following the health and safety requirements of the directives:
European Directives consulted during the design stage
Directive
Number
Title and implementation into Italian legislation
Directive
2014/30/EC
Directive
2006/95/EC
EMC Directive 2014/30/EC of the European Parliament and of the Coun-
cil of 26 February 2014 on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility (recast) (all languages),
aligned to the New Legislative Framework, will be applicable from 20
April 2016.
The Directive 2006/95/EC of the European Parliament and of the Council
of 12 December 2006 on the harmonisation of the laws of Member States
relating to electrical equipment designed for use within certain voltage
limits (codied version) was published in the OJEU L 374 of 27.12.2006,
p. 10-19. It entered into force on the 20th day following that of its publica-
tion, i.e. on 16 January 2007. The old Directive 73/23/EEC was repealed
on the same date.
! 6 Norms and standards used for the design and testing
The MLB242 analyzer corresponds to the essential requisites of the norms:
EN 55022:2010
Radio disturbance characteristics - Limits and methods of meas-
urement.
EN 61326-
1:2013
Electrical equipment for measurement, control and laboratory use -
EMC requirements - Part 1: General requirements
EN 61010-1
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 1: General requirements (IEC
61010-1:2010 + Cor. :2011
ENV 61010-2-
081
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-081: Particular requirements for
automatic and semi-automatic laboratory equipment for analysis
and other purposes (IEC 61010-2-081:2001
To Next Page
Loading...