32
MLB242
User’s Guide MLB242-V1
4 Error messages
Please understand that not all messages generated by the system can be explained
in this document. In most cases read the message and try to solve it as displayed by
the system. In case of a more serious message get in touch with your distributor e.g.
Temperature is out of range, measurements could be wrong!
PROBLEM CHECK
Start problem: blue LEDs are blinking contentiously, no information on display
longer than 5 minutes.
Fatal error in start up procedure, must be repaired by the manu-
facturer! Get in touch with your service.
DB ERROR Could be appeared when the conguration le is not compatible
with the analyser.
action: try again or upload on the analyser the appropriate cong-
uration le
Printer Oine the printer is disconnected
action: try again or contact the assistance
Reading Unit Oine
the reading part is disconnected
action: try again or contact the assistance
Temperature is out of range, get in touch with service.
To Next Page
Loading...