car MLB242 - Transportation and Storage; Receipt of the Analyzer

19
MLB242
User’s Guide MLB242-V1
1.9 Transportation and storage
Packaging, movement and transportation
The analyzer and its accessories are packed together in a cardboard box. To transport
it, use its cardboard box to protect it against atmospheric inuences. Please note that
the carton does not provide su󰀩cient protection against rain, sun, snow and wind.
Storage conditions
The analyzer in its carton must be stored in a closed environment within the tempera-
ture range +5°C to +30°C (41°F to 86°F) and a relative non-condensed humidity of
20% to 90%. The storage place must not be exposed to contaminating agents such as
humidity, dust, acids, corrosive gases, salt, smoke etc. Do not stack the cartons more
than ve high.
Conservation and/or disposal of the packaging
The manufacturer recommends conserving the cardboard box in case of future trans-
portation purposes. The disposal of the packaging does not present any particular dan-
gerous aspects to persons, animals or materials. Before disposal of the cardboard box,
consult the Council Directive 94/62/CE on packaging and the disposal of packaging.
1.10 Receipt of the analyzer
Each analyzer is checked following specic procedures on instruments by cdR prior
shipment. However, damage could occur during transportation and will not be the
responsibility of cdR. E󰀨ectuate a visual control of the packaging and the apparatus to
check that there is no visual damage due to knocks and bangs. If damage is evident,
call with your sales representative to nd a solution.
Control whether all parts are available by Packing List.