car MLB242 - Maintenance and Hygiene; First-Aid Measures; Repairs

10
MLB242
User’s Guide MLB242-V1
Quality Accuracy and Precision of the measured results
- In order to ensure a awless operation of the analyzer mea-
sure control samples and watch the function of the analyzer
closely.
- Faulty measurement results may result in an incorrect diagno-
sis or range danger for patient.
Fire and Explo-
sion Hazards
- Do not place any inammable or hazardous explosive material
close to the device.
- Electrical sparks could cause re or explosions.
Operator Quali-
cation
- The analyzer should only be operated by trained personnel.
Improper operation of the analyzer might cause inaccurate
measuring results!
! 2 Maintenance and Hygiene
- No organic acid based cleaning substances should be applied. Instead use clean-
er designed for cleaning and disinfecting laboratory analysers.
- Only use a dampened cloth to clean the analyser.
- Never spray or pour cleaning solution directly onto the analyser that may negative-
ly impact the analyzer’s functions signicantly.
- Keep the analyser clean and do not spill liquids onto it.
- In case liquids were spilled onto the analyser, immediately absorb liquid with a
suitable cloth.
- Contact your distributor if your control measurements do not produce the expected
results.
Cleaning and Disinfection
- Use a suitable surface disinfectant solution available for laboratory instruments.
- In urgent cases use Surgical Spirit 94% if no other more suitable solution is availa-
ble.
! 3 First-Aid Measures
- If a person swallowed any chemical solution may be while servicing, wash out
mouth with water.
- If provided person is unconscious, than call a physician.
- If inhaled, remove to fresh air. If breathing becomes di󰀩cult, than call a physician.
- In case of contact, immediately wash skin with soap and copious amount of water.
- In case of contact with eyes, ush with copious amounts of water for at least 15
minutes.
- Assure adequate ushing by separating the eyelids with ngers, than call a physi-
cian.
! 4 Repairs
Repairs to the analyser may only be carried out by trained personnel, and replacement