Page | 55
Carlson Software
Improper baery use may result in a re, explosion or other hazard.
CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
Wall Charger Warnings
WARNING! To reduce the risk of personal injury, electrical shock, re or
damage to the equipment:
Plug the wall charger into an electrical outlet that is easily accessible at all
mes.
Do not place anything on the wall charger cord or any of the other cables.
Arrange them so that no one may accidentally step on or trip over them.
Do not pull on a cord or cable. When unplugging the wall charger from the
electrical outlet, pull on the plug, not the cord.
The AC wall charger must be approved by Juniper Systems, have an output
rang of 12 VDC and a minimum 1.67 A, and be cered or listed by a
naonally recognized tesng laboratory. The AC wall charger provided with
the RT4 meets these criteria. Using any other external power source can
damage your product and void your warranty.